Amc Control Panel; General Tab; Versions - Axis 24533R3 User Manual

14

AMC Control Panel

The AMC Control Panel is used to configure AMC. The figure below, General Tab, shows the different
parts of AMC that can be configured such as audio and PTZ, for example. The sections below describe
each of these AMC tabs and how to configure AMC.
Open the AMC Control Panel by clicking Start > Settings > Control Panel > Axis Media Control.
Depending on which camera you are using, you will have either some or all of the following tabs
shown in the figure below.
Note: If you are using a simpler Axis camera, not all of the tabs shown below will be visible. If you then log into
a camera with greater functionality, the necessary software will also be installed for use with that camera. If you
later go back to the simpler camera, while not usable, the additional tabs will still be visible.
Note: Also note that any changes you make to the settings tabs in AMC will not appear in the live view until you
refresh your browser (Click View > Refresh).

General Tab

Versions

Versions shows the software that has been installed to use with AMC and your Axis camera together
with its version number.
The figure above shows version information about M-JPEG, MPEG and audio components.
View License
Click on
http://www.axis.com/techsup/cam_servers/amc_software/license.htm.
Click on View readme to open a text document providing more information about your specific version
of AMC.
to open the Axis AMC support site in you Web browser:
AMC