Panasonic BB-HCM515A - Network Camera w/ Audio Installation Manual

Installation Guide

Network Camera
BB-HCM515A
Model No.
Please read the included Important Information before proceeding.
Complete Operating Instructions and all other documentation can be found on the included CD-ROM.
• This document (Installation Guide) explains how to physically connect the camera to the power supply and network, as well how to mount or place the
camera for regular use.
• The Setup Guide describes how to set up the camera so that it can be accessed using a PC.
• Refer to the Operating Instructions on the CD-ROM for details regarding the camera's features.
• Refer to the Troubleshooting Guide on the CD-ROM if you have any problems configuring or using the camera.
Abbreviations
• UPnP is the abbreviation for "Universal Plug and Play".
• The Network Camera is referred to as "the camera" in this document.
• The Setup CD-ROM is referred to as "the CD-ROM" in this document.
Installation Procedure Overview
The following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.
Preparation Camera Diagram
Confirm that you have all Make sure you know the
the items required for names of the camera's
installation. physical features.
Preparation
1. Confirm the following items are included in the camera's packaging.
• Additional pieces can be ordered by calling 1-800-332-5368.
Main Unit (1 pc.)
Flexible Stand (1 pc.)
Order No. PQKL10082Z1
Safety Wire (1 pc.)
Order No. PQME10080Z
Used to secure the camera
when mounting it.
2. You will need the following additional items to install and configure the camera.
– a PC (see the system requirements in the Important Information document)
– a LAN cable (CAT-5 straight cable)
– a router
Option
You can also connect the camera using the optional Panasonic BB-HCA3A AC Adaptor.
The BB-HCA3A includes the following items.
AC Adaptor (1 pc.)
Cord Length: About 3 m (9 feet 10 inches)
Camera Diagram
Front View
A Lens cover
B Lens
A
C Microphone
D Indicator
B
C
D
*1 See 1.1 Understanding the Camera Indicator in the Troubleshooting Guide on the CD-ROM for indicator meaning.
© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX15708YA KK1106MH1107
Please read this document before using the product, and save this document for future
reference. Panasonic Network Camera Website: http://www.panasonic.com/netcam
for customers in the USA and Puerto Rico
Indoor Use Only
(PoE Ready)
Connections
Connecting the camera to
your network and to the
power outlet.
Washer S (1 pc.)
Order No. XWG4F16VW
Used when securing the safety
wire to the camera.
Washer L (1 pc.)
Order No. XWG26D12VW
Used when securing the safety
wire to the ceiling or wall.
Important Information (1 pc.)
Installation Guide (this
document) (1 pc.)
Setup Guide (1 pc.)
Side and Bottom
View
*1
Setup
Setting up the camera (described in the included
Setup Guide). This involves configuring the
camera so that it can be accessed from a PC.
AC Cord (1 pc.)
Cord Length: About 1.8 m (5 feet 11 inches)
E FACTORY DEFAULT
RESET button
E
F SD memory card slot
F
G RESTART button
H FUNCTION
G
button/indicator
H
I Stand/tripod mounting
hole
I
Mounting
Mounting or placing the
camera.
Screw A (1 pc.)
Order No. PQHV2610PJ65
Used for connecting the safety wire to the
camera.
Screw B (4 pcs.)
Order No. XTB4+20AFJ
Used for mounting the camera.
Setup CD-ROM (1 pc.)
Order No. PQQX15704ZCD
Contains the Setup Program needed to
configure the camera, as well as the camera's
documentation.*
*See the included Important Information for a description of
each document.
Rear View
Stand mounting hole
J
K Serial number and
J
K MAC address label
L
L AC adaptor cord/video
M
cable hook
N
M Speaker/microphone
cable hook
N LAN port
O P Q R S
O DC IN
P External I/O interface
Q VIDEO OUT terminal
R AUDIO OUT terminal
S MIC terminal
1