Selecting An Activity; Controlling Individual Devices; Using The Smart Buttons - Logitech Harmony 550 - Harmony 550 Universal Remote User Manual

Harmony 550
While the Help button helps you solve device problems within an Activity, the Remote Assistant teaches
you how to use your Harmony remote. The following is an example of the type of help the Remote
Assistant offers:
Example
If any devices are not set up correctly, press "Help" now.

Selecting an Activity

Controlling Individual Devices

Press Devices to enter device mode. Device mode gives you access to all the possible commands for
each device included in your Harmony remote configuration. To access device mode you do not need to
be in an Activity. However, you should never need to use device mode during normal use of your
Harmony remote. This mode should only be used to send a specific command to a specific device.
You can eliminate the use of device mode by customizing your Activities.
Example
You can put commands on the display or customize specific buttons for the commands.
See Customizing Your Harmony
At any time, press Devices to switch into device mode. Once in this mode, the Harmony remote will
display a list of all the devices you have in your configuration. Select a device from the list and the
Harmony remote will only control the device features for the device.
Example
If you choose Television as the device, the number, volume and channel buttons will all control
your television.
Press Devices to return to Activity mode.

Using the Smart Buttons

While there is a default setting for the buttons in most Activities, you can customize these buttons to send
different commands. See
v. 1.1
View the Activities you have added by pressing the Activities button. The
display will then list the Activities you have added. Press the corresponding
display button next to the Activity you want to start.
As a default, when you select an Activity, you will see a message on the
remote's display reminding you to keep the remote pointed at your
entertainment system while the Activity starts. This helps ensure that all
infrared (IR) signals are properly sent.
To turn on/off the "Starting Activity" message:
1. Connect your Harmony remote to your computer to start the Harmony
remote control software.
2. Click Remote Preferences.
3. Select Settings.
4. Click Next.
Remote.
Changing the Behavior of Buttons Within an Activity.
User Manual
page 6