Samsung DIRECTV SIR-S75 Owner's Manual page 99

Chapter 6: Settings, preferences, upgrades, and extras
Setting the Digital out audio format (model SIR-S75 only)
If you are using the optical digital audio out port to connect your model SIR-75
DIRECTV Receiver to a digital audio receiver, you should use this preference setting
to tell your DIRECTV Receiver whether your audio receiver processes PCM digital
audio signals or Dolby Digital audio signal. See the manual for your audio receiver if
you are not sure.
To set the Digital Out preference, follow these steps:
1
Press the MENU button on your remote control.
The Main menu appears.
2
Use the arrow buttons on your remote control to highlight the Setup menu
item, then press the
The Setup menu appears.
3
Use the arrow buttons on your remote control to highlight the Preferences
menu item, then press the
The Preferences menu appears.
4
Use the arrow buttons on your remote control to highlight the Audio menu
item, then press the
The Audio menu appears.
5
Use the arrow buttons on your remote control to highlight the Digital Out
menu item, then press the
A list appears from which you
can choose Dolby Digital or PCM
audio formats.
6
Use the arrow buttons on your
remote control to highlight the
format supported by your audio
receiver, then press the
your remote control.
When you select a format the Digital Out list disappears. Your selection is
indicated in the Digital Out line on the Audio menu .
91
button on your remote control.
button on your remote control.
button on your remote control.
button on your remote control.
button on