Haier DCA-30RA User Manual page 30

Inital Use
Connect the appliance to the power supply.
Temperature setting and regulation.
A temperature knob (as illustrated) is provided
at the lower right corner of the back panel for
selection of operation modes. Three modes are
available, i.e. strong (cooling), standard (cooling)
and weak (cooling). The inner temperature will rise slightly
when the ambient temperature gets higher,
with a temperature difference of approx. 20 C.
Plug in the appliance and the refrigeration system
starts operation. Use the temperature knob to select
an operation mode. After the desired inner temperature
is reached, it will be maintained with little changes by
the automatic temperature control system.
The temperature knob is set to standard position in
factory. The user can regulate the inner temperature by
adjusting the knob.
Loading the refrigerator
The inner compartment will be cold enough
after a couple of hours of non-load operation
and ready for food storage.
When the knob is adjusted, it takes some time to reach the
desired inner temperature . The period will be longer or
shorter, depending on the ambient temperature, amount
Notes of food and how often the door is opened
8
Weak
Strong Standard