KitchenAid KBRS19KTBL - 18.5 cu. Ft. Bottom Mount Refrigerator User Instructions page 13

User instructions
Hide thumbs Also See for KBRS19KTBL - 18.5 cu. Ft. Bottom Mount Refrigerator:
Table of Contents

Advertisement

Available languages

Available languages

CONDITION/REASON:
REFRIGERATOR too
warm
FREEZER too warm/too
little ice
REFRIGERATOR
too cold
FREEZER too cold
Additional Digital Control Center Features
Max Cool
The max cool feature assists with periods of high refrigerator use,
full grocery loads, or temporarily warm room temperatures.
Press MAX COOL to set the freezer and refrigerator to the
lowest temperature settings. Press MAX COOL again to return
to the normal refrigerator set point.
NOTE: The Max Cool feature will automatically shut off in
approximately 12 hours.
Max Ice Feature
The Max Ice feature assists with temporary periods of heavy ice
use by increasing ice production.
Press MAX ICE to set the freezer to the lowest temperature
setting. Press MAX ICE again to return to the normal freezer
set point.
NOTE: The Max Ice feature will automatically shut off in
approximately 24 hours.
Holiday Mode
In Holiday Mode, the freezer will not automatically defrost as often
to conserve energy.
Press HOLIDAY MODE until the indicator LED is lit to turn on
this feature. Press HOLIDAY MODE again or open the
refrigerator door to turn off this feature.
NOTE: The refrigerator door may be opened within 1 hour of
setting Holiday Mode without turning off the feature.
Temp Alarm
The Temp Alarm feature provides temperature information in the
event of a power outage.
Power outage: During a power outage, if the temperatures in the
refrigerator and freezer compartments exceed normal operating
temperatures, the highest temperature reached will be displayed.
Press TEMP ALARM until the indicator light is lit, to turn on
this feature. Press and hold TEMP ALARM for 3 seconds until
the indicator light goes off to turn off this feature.
ADJUSTMENT:
Adjust REFRIGERATOR Control 1°
lower
Adjust FREEZER Control 1° lower
Adjust REFRIGERATOR Control 1°
higher
Adjust FREEZER Control 1° higher
Temperature alarm: An alarm will sound repeatedly if the freezer
or refrigerator compartment temperatures exceed normal
operating temperatures for an hour or more.
The temperature displays will alternately show the current
temperatures and the highest temperatures the compartments
reached.
Press TEMP ALARM once to stop the audible alarm and
alternating temperature displays. The Temp Alarm light will
continue to flash until the refrigerator returns to the set
temperature.
Door Alarm
The Door Alarm feature sounds a chime every few seconds when
the refrigerator door has been left open for 5 continuous minutes.
The chime will sound until the door is closed or Door Alarm is
turned off.
Press DOOR ALARM to turn this feature on or off. The
indicator light will be lit when the Door Alarm feature is on.
Water Filter Status Light and Filter Reset
(on some models)
The Filter Reset control allows you to restart the Water Filter
Status tracking feature each time you replace your water filter. See
"Water Filtration System."
Digital Control User Preferences
The control center allows you to set user preferences, if desired.
Temperature Display (F_C)
This preference allows you to change the temperature display.
F - Temperature in degrees Fahrenheit
C - Temperature in degrees Celsius
Alarm (AL)
This preference allows you to turn off the sound of all alarms.
ON - You will hear the alarm sound.
OFF - You will not hear the alarm sound.
Sabbath Mode (SAB)
IMPORTANT: This preference does not disable interior lights.
ON - All control panel lights will be disabled.
OFF - All control panel lights will be enabled.
NOTE: Press any touch pad on the control panel to restore the
control panel lights.
To Access the User Preferences Menu:
1. Press and hold DOOR ALARM for 3 seconds. The preference
name will appear in the Freezer display and the preference
status (F or C) or (ON or OFF) will appear in the Refrigerator
display.
2. Use the Freezer (+) or (-) touch pads to scroll through the
preference names. When the desired preference name is
displayed, press the Refrigerator (+) or (-) touch pads to
change the preference status.
3. Set your preferences by pressing and holding DOOR ALARM
for 3 seconds, or by shutting the refrigerator compartment
door.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents