ScanSoft OMNIPAGE PRO 11 Manual page 14

14 I
NSTALLATION AND SETUP
Note
It is planned to provide Text-to-Speech for English (British and
US), French, German, Italian, Portuguese and Spanish. This may vary
depending on region or version. Please check in the Readme file for latest
information. A speech system for only one language can be installed with
OmniPage Pro. See also the section Reading text aloud in chapter 5.
S
ETTING UP YOUR SCANNER WITH
All files needed for scanner setup and support are copied automatically
during the program's installation. Before using OmniPage Pro 11 for
scanning, your scanner should be correctly installed and tested for correct
functionality.
Scanner installation and setup are done through the Scanner Wizard. You
can start this yourself, as described below. Otherwise, the Scanner Wizard
appears when you first attempt to perform scanning from OmniPage Pro
11.
Please follow these steps to use the Scanner Wizard to setup your scanner
with OmniPage Pro 11:
Choose Start Programs ScanSoft OmniPage Pro 11.0
Scanner Wizard
or click the Setup button in the Scanner panel of the Options
dialog box.
or choose a scan command in the Get Page drop-down list in the
OmniPage Toolbox.
Choose Select scanning source, then click Next.
Click once on your scanner's TWAIN driver to select it, then
click Next.
Choose Yes to test your scanner configuration, then click Next.
The wizard will now test the connection from the computer to
your scanner. Click on Next.
Insert a test page into your scanner.
The wizard is now prepared to do a basic scan using your scanner
manufacturer's software. Click on Next.
O P P
MNI AGE RO