Configuring Your Audio I/O - PRESONUS STUDIO ONE ARTIST Start Manual

CONFIGURING YOUR
Now that you've configured your MIDI devices, let's create a
new Song and set up your default Audio I/O.
STEP 1
STEP 2
bit depth. You can also determine the length of your Song and
the type of time format you would like to use (Notation Bars,
Seconds, Samples, or Frames). Click the OK button when you
are finished.
If you plan on importing loops into your Song, you may want to
select "Stretch Audio Loops to Song Tempo" so that any loop
of a known BPM (like those in the included content library)
will import at the correct tempo.
STEP 3
AUDIO I/O
From the Start page, select "Create a new
Song."
To begin a new Song, select "Empty
Song" from the Templates list. At this
point, you should give your Song a name
and select your preferred sample rate and
When the Song window launches, launch
the Audio Setup window by going to File |
Options... (PC) or Studio One | Preferences
(Mac), and click on the Audio Setup button.
16 | PreSonus 2009