PRESONUS FIRESTUDIO - V 3.0 User Manual page 18

26 i/o 24-bit/96 khz recording interface
Table of Contents

Advertisement

To begin recording, create an audio track, assign it to Input 1, and connect a microphone or instrument to
Channel 1 on the front panel of the FireStudio. Select the record enable ( ) and monitor ( ) on your track
in Studio One Artist. Turn up the Channel 1 gain knob on the front panel of the FireStudio while
speaking/singing into the microphone or playing your instrument. You should see the input meter in Studio
One Artist react to the input. Adjust the gain so the input level is near its maximum without clipping.
Connect a set of headphones to the FireStudio headphone output. You may also wish to connect monitors to
the FireStudio's Main Outs. You are now ready to record. For complete instructions, please consult the
Reference Manual,
Studio One
Creating MIDI Tracks
GETTING STARTED
Once you have added your Tracks, you can assign the input by simply clicking
on the input to which a Track is currently assigned. This will bring up your
inputs list. You can also access the Audio I/O Setup from here.
If you would like to add a Track for each of the available inputs and have the
routing automatically assigned, simply go to Track | Add Tracks for All Inputs.
which is located on your Studio One Artist Installation DVD.
Click on the Add Tracks button. When the Add Tracks window launches, select
Instrument as the Track Format and click the OK button.
To assign your MIDI input, click on the MIDI Inputs list and select your
external sound module.
If you have added Virtual Inputs to your session, you will also see them as
available inputs.
If you selected your MIDI keyboard controller as the default keyboard, it will
already be selected. If not, choose your MIDI controller from Output menu
directly below.
To the left of the Add Track button, you will find the Inspector button. Click it
to display more parameters for the selected track.
At the bottom of the Inspector menu, you will see your Bank and Program
selections. From here, you can remotely change the patch on your sound
module.
15 | PreSonus 2008

Advertisement

Table of Contents
loading

This manual is also suitable for:

Firestudio

Table of Contents