Advertisement
(Note)
After the first installation if you need to re-install again it is ok to keep the
Firewire connected to the Firestation.
To re-install, you must first remove mLAN that is
currently installed. Please do as follows.
1. Use the UNINSTALLER.EXE located in the programs menu within the
YAMAHA MLAN TOOLS.
2. Go into ADD AND REMOVE PROGRAMS and delete the YAMAHA
MLAN BUS listed in there, if present.
3. Right click on the Start menu and click Explore. Go into program files
and into the Yamaha folder. In the Yamaha folder you will have an mLAN
Tools folder. Delete this folder and all of its contents.
Advertisement
