Epson AP-60 - Projector Sound Solution Installation Manual page 16

7
Insert the audio cables into the cable channel, then feed the cables through the audio control panel slot as
shown below.
8
Connect the audio cables to the audio control panel.
Power
ANTFD
Off / Low / Hi
3.5 mm stereo-mini jack input
9 Gently slide the audio control panel back into the AP-60 while pulling out any excess cable from the top of
the unit.
RCA line input
Line 1
L
HF LCP
Off / On
R
Line 2
DVD
Output
CMD
Rec
Microphone IR sensor
3.5 mm stereo-mini jack output
16
RS232