Table of Contents
Advertisement
About Your Projector
Top View
1
Control panel
2
Focus tab
3
Lens
4
IR receivers
5
Lens cap
6
Antenna
7
Mounting holes for wall mount: Screw hole M3 x 6.5mm depth.
Recommended torque <8 kgf-cm
8
Mounting hole for tripod: Insert nut 1/4"*20 UNC
9
Lamp cover
10
Tilt adjustment wheel
CAUTION:
Do not use the projector near appliances that generate a lot of heat.
1
Do not use the projector in areas where there is an excessive amount of dust. The
2
dust may cause the system to fail and the projector will automatically shutdown.
Ensure that the projector is mounted in a well-ventilated area.
3
Do not block the ventilation slots and openings on the projector.
4
Ensure the projector operates between ambient temperatures (5ºC to 35ºC).
5
Do not try to touch the ventilation outlet as it can become very hot after the
6
projector has been turned on or immediately after it is turned off.
4
1
5
Safety Instructions
Bottom View
9
6
2
3
10
Your Dell Projector
8
7
14.00±0.10
55.00±0.10
55.00±0.10
110.00±0.15
110.00±0.15
7
Advertisement
Table of Contents
