V
P
—Press
ERTICAL
OSITION
up.
F
—Allows you to change the display data clock frequency to match the
REQUENCY
frequency of your computer graphics card. If you see a vertical flickering wave, use
Frequency control to minimize the bars. This is a coarse adjustment.
T
—Synchronize the phase of the display signal with the graphic card. If you
RACKING
experience an unstable or flickering image, use Tracking to correct it. This is a fine
adjustment.
DISPLAY (in Video Mode)
Using the Display menu, you can adjust the display settings of your projector. The
Picture menu provides the following options:
A
R
—Allows you to select the aspect ratio to adjust how the image
SPECT
ATIO
appears.
•
Original — Select Original to maintain the aspect ratio of image projected
according to input source.
•
4:3 — The input source scales to fit the screen and projects a 4:3 image.
•
Wide — The input source scales to fit the width of the screen to project a
wide screen image.
to move the image down and
Z
—Press
to activate Zoom menu.
OOM
Select the area to zoom and press
Adjust the image scale by pressing
press
Z
N
OOM
AVIGATION
menu.
Use
to view.
—Press
to activate Zoom Navigation
to navigate projection screen.
Using Your Projector
to move the image
to view zoomed image.
or
and
31