Table of Contents
Advertisement
F
—Allows you to change the display data clock frequency to match the
REQUENCY
frequency of your computer graphics card. If you see a vertical flickering wave, use
Frequency control to minimize the bars. This is a coarse adjustment.
T
—Allows you to sybchronize the phase of the display signal with the
RACKING
graphic card. If you experience an unstable or flickering image, use Tracking to
correct it. This is a fine adjustment.
DISPLAY (in Video Mode)
Using the Display menu, you can adjust the display settings of your projectors.
The Picture menu, provides the following options:
V
M
—Allows you to optimize the projectors display mode:
IDEO
ODE
PC, Movie, sRGB (provides more accurate color representation), Game, and
Custom (set your preferred settings). If you adjust the settings for White Intensity
or Degamma, the projector automatically switches to Custom.
NOTE:
If you adjust the settings for White Intensity or Degamma, the projector
automatically switches to Custom.
S
T
—Manually select signal type RGB, YCbCr, or YPbPr.
IGNAL
YPE
Z
—Press
to digitally magnify an image up to 4 times on the projection
OOM
screen and press
Z
N
—Press
OOM
AVIGATION
W
I
—Set 0 to maximize the color reproduction and 10 to maximize
HITE
NTENSITY
the brightness.
D
—Adjust among the 4 preset values (1, 2, 3, 4) to change the color
EGAMMA
performance of the display.
to reduce the zoomed image.
to navigate projection screen.
http://www.pureglare.com.au
Using Your Projector
31
Advertisement
Table of Contents
