Chapter 6: Storing & Copying Programs - Alesis Spitfire 30 User Manual

6 Storing & Copying Programs
To Store a Program
1. In PLAY or EDIT mode, press the VALUE knob.
The display will flash the current program number.
2. Use the Program Up and Down buttons, VALUE
knob or the optional footswitches to select the
program number where the current program will
be stored. If you want to save it in the same
program number, you can skip this step.
3. Press the VALUE knob again to store the
program in the selected place. The Spitfire then
returns to the mode it was in before you began the
store operation, and the destination program
becomes the current program.
To Copy a Program
To make a copy of an unedited program, select that
program and then follow the steps outlined above to
store it to a new location.
The store operation
times out if you do
nothing for more than
five seconds. You also
can abort the operation
by turning the EFFECT
knob to a different
position.
21