Configuring Outlook To Use Tapi - Cisco 7912 - TEKELEC Manual

Configuring Outlook to Use TAPI

Configuring Outlook to Use TAPI
140 Set Up Outlook for TAPI
16. Click OK to return to the Phone and Modem Options dialog box.
17. Click Close in the Phone and Modem Options dialog box.
Windows is now configured to allow users to make calls from their contacts, but the
TAPI-enabled program must be configured to use the line for dialing. For
information on configuring the program to use the telephone line for dialing, go to
"Configuring Outlook to Use TAPI".
To configure Outlook or another TAPI-enabled program to dial using the system,
use the following steps:
1. If not already running, start Outlook (or the TAPI-enabled application).
2. Click the Contacts icon to switch to the Contacts listing.
3. Right click any contact to bring up the Actions shortcut menu.
Cisco 7912 Telephone User Guide
620-05600350