Replying To A Message; Dialing Back A Caller - Cisco 7912 - TEKELEC Manual

Replying to a Message

Dialing Back a Caller

Cisco 7912 Telephone User Guide
620-05600350
•
press # to enter another number or,
•
press ## if this is the only (or last) person to receive the forwarded
message.
3. You get a prompt to leave an introduction to the forwarded message:
a. Record your introductory message.
To forward the voice mail immediately without an introductory message,
press # immediately after the prompt.
b. Press # to accept the message.
4. Choose one of the following options to finish forwarding:
•
Press 1 to forward the message.
•
Press 2 to change the introductory message.
•
Press 3 to review the introductory message.
•
Press 9 to mark urgent and forward.
•
Press * to cancel the forward.
Press * at anytime to cancel the forward. If you press *, you must reenter the
extension(s) and any desired introduction.
To reply to a message you receive:
1. Press 2 to reply to the message.
You hear a prompt to record your reply.
2. Record your reply message.
3. Press # to accept your message.
Your voice mail system gives you the following options:
•
Press 1 to send reply.
•
Press 2 to change reply.
•
Press 3 to review reply.
•
Press 9 to mark urgent and reply.
•
Press * to cancel the reply and re-record.
You hear the message options again.
To dial a caller who left a message (if Caller ID information is available):
Press 88.
Compose and Send a Message
Voice Mail Features (Option A Menu) 97