Loading Envelopes - Canon BJC-8200 User Manual

Loading Envelopes

1.
Lower the paper thickness lever to the
2.
Lower and pull out the paper output tray.
3.
Prepare the envelopes for loading in the sheet feeder.
• Make sure that none of the flaps are overlapping.
Caution
• If the edges of the envelopes are not sharp,
crease them with the side of a pen or biro.
• Press down on the corners and sides of the
envelopes to make them as flat as possible by
expelling all the air inside the envelopes.
• To avoid paper jams, make sure the envelopes are
flat before you load them in the sheet feeder.
4.
Slide the paper feed guide completely to the left.
5.
With the return address facing up and pointed down,
align the stack with the right side of the sheet feeder and
insert the stack in the printer.
• You can load up to 10 standard European DL or U.S.
Memo
Commercial No. 10 envelopes in the sheet feeder.
• Do not allow more than 10 envelopes to stack on the
paper output tray
6.
Slide the paper guide to left edge of the stack.
Loading Paper and Special Print Media
mark.
47