Kyocera FS-1300D Operation Manual page 78

Printed Results
Faint or blurred printing
Gray background
Dirt on the top edge or back of the
paper
Printing incomplete or out of position
5-4
Corrective Action
Check the toner container and if necessary replace. Refer to Toner
Container Replacement on page 4-2.
Clean the charger wire. Refer to Cleaning the Printer on page 4-6.
Check the toner container and if necessary replace. Refer to Toner
Container Replacement on page 4-2.
Check the develper unit and drum unit are installed correctly. Refer to
Cleaning the Printer on page 4-6.
If the problem is not solved even after printing several pages, c
the registration roller. Refer to Cleaning the Printer on page 4-6.
If the problem is not solved after cleaning, call for service.
Check that the printing settings are correct in the application software
and the printer driver.
Check whether the problem is being caused by a PRESCRIBE
command error. If the problem occurs only with a specific file or
program, the most likely cause is an error in a parameter to a
command or command syntax.
lean
Troubleshooting