Epson FX-1050 - Impact Printer Product Support Bulletin page 4

EPSON
EPSON AMERICA, INC.
SERVICE
PSB NO.: P-0024
SUBJECT: FX-850/1050
The FX-850/1050 dot matrix printers support an important feature
that is currently undocumented in the printer's User's manual.
The FX-850/1050 printers have the ability to enable or disable
the input buffer.
front panel by holding down the Load/Eject button during power
The printer will beep once indicating that the buffer is
disabled or will beep twice indicating that it is enabled.
condition of the input buffer
repeating the above operation.
may be used to determine the current setting of the input buffer
without changing it.
below.
Skip Perforation
Auto LF
Input Buffer
Skip Perforation
Auto LF
Input Buffer
EPSON
AMERICA SERVICE,
P S
RODUCT UPPORT
DATE: 8/01/88
UNDOCUMENTED
This feature is controlled from the printer's
may
Please refer to the Self Test examples shown
None
Depend on I/F
Valid
None
Depend on I/F
Invalid
23610
TEL0 AVENUE,
B
ULLETIN
BUFFER FEATURE
be changed back by simply
The printer's Self Test feature
OFF
2-4
OFF
2-3
2-4 OFF
TORRANCE, CALIF. 90506
PAGE: of
1 1
The