NETGEAR ProSafe JGSM7224 Hardware Installation Manual page 14

2. Connect the other end of the cable to a workstation or terminal.
3. If you attached a workstation, start a terminal emulation program.
• Microsoft Windows users can use HyperTerminal, which comes with the Windows
operating systems.
• Macintosh users can use ZTerm.
• UNIX users can use a terminal emulator such as TIP.
4. Configure the terminal-emulation program to use the following settings:
• Baud rate: 9,600 bps
• Data bits: 8
• Parity: none
• Stop bit: 1
• Flow control: none
After you connect a console to the switch, you will need to configure the switch. The following
documents are provided for this purpose:
• Installation Guide. Explains basic setup and configuration (provided as both a print
document and in PDF format on the Resource CD).
• ProSafe JGSM7224 Managed Switch CLI Reference Manual. Gives detailed examples of
how to use the CLI. A link is provided on the Resource CD.
• ProSafe JGSM7224 Managed Switch Reference Manual. Describes configuration
examples. A link is provided on the Resource CD.
ProSafe™ 24-Port Managed Switch JGSM7224
Hardware Installation
14