Table of Contents
Advertisement
3. Download the AI-Scripts install package. If you will install AI-Scripts manually, move the
AI-Scripts Install Package Versioning
AI-Scripts install packages are versioned as follows:
or
The AI-Scripts files that are in the install package are compressed into a tgz tarball file.
Each AI-Scripts install package supports up to three previous years of Junos OS releases.
The show version CLI operational command displays the version of the AI-Scripts install
package that is installed on a device.
The JMB contains the output of the show version CLI command to indicate the version of the AI-
Scripts install package installed on a device.
AI-Scripts Install Locations on Devices
AI-Scripts are installed on a device hard disk in the following location:
AI-Scripts are installed on a device flash drive in the following location:
NOTE: If you configure the load-scripts-from-flash option, the system reads AI-
Scripts from the /config/scripts/ directory; otherwise, the system reads AI-
Scripts from the /var/db/scripts/ directory. The /var/run/scripts directory will
always point to the right scripts directory.
Automatically Installing AI-Scripts Overview
Automatically installing AI-Scripts install packages to one or more devices involves AIM
interaction with Junos Scope software Script Management.
The automated AI-Scripts installation process requires the following key tasks:
©
Copyright
2010, Juniper Networks, Inc.
package to the /var/sw/pkg directory on the device.
If you do not move the AI-Scripts install package to the device, you have to use ftp or scp in
conjunction with the request system scripts add command. (Optional) If you will use the
Junos Scope software to automatically install an AI-Scripts package to a group of devices at
once, download the AI-Scripts install package on the same server as Advanced Insight
Manager (AIM).
jais-m.nZx.x--signed.tgz
jais-2.4R1.5-signed.tgz
m and n are two integers that represent the software release number; m denotes the major
release number; n the minor.
Z is a capital letter that indicates the type of software release. In most cases, it is an R, to
indicate that this is released software. If you are involved in testing prereleased software, this
letter might be a B (for beta-level software).
x.x is the software build number and spin number.
/var/db/scripts/
/config/scripts
Install and set up Junos Scope 9.0 or later. See the Junos Scope Software User Guide.
Install AIM. See the AIS User Guide.
Set up AIM settings. See the AIS User Guide.
Installing AI-Scripts
33
Advertisement
Table of Contents
