Materials To Be Used - WAGNER W 95 Manual

GB
The spray guns are not to be cleaned with flammable solvents which have a
●
flashpoint under 21°C.
Take precautionary measures against potential hazards from the spray liquid and
●
follow any instructions given on containers or laid down by the manufacturer of the
liquid.
Do not spray any liquid of unknown hazard potential.
●
Wear a breathing mask and ear protection.
●
Max. delivery ratee
Max. viscosity
pressure spikes: 120 bar
Max.
Power source:
Power consumption:
Round spray nozzle: 0,8 mm
Weight:

Materials to be used:

Paints and varnishes containing solvents, acrylic enamel paints, water-soluble
varnishes, glazes, polishes, wood preservatives, disinfectants, plant protectives,
saturants, as well as oils and other watery liquids.
The following spray substances are not suitable for use:
Dispersion and latex paints, materials containing strong abrasives, glazes with coarse
particles, strippers and caustic solutions, silicate paints.
Use of these spray materials can lead to increased wear or corrosion damage in the
pump area, which are not covered by the WAGNER-Guarantee.
Preparing the Spray Material
The paints usually need to be diluted for use with the spray gun. You will find guidelines
for sprayable dilutions in the following viscosity table (viscosity = consistency of the
paint). You can achieve the correct dilution by using the viscosity test cup.
12
Technical Data W 95
140 g/min
(runout time) 60 sec.
230 V, 50 Hz
70 W
1,5 kg
Container capacity:
Double insulation:
Pump:
Pump cylinder:
Piston:
Oscillation level:
Sound pressure level:
Sound pressure output:
W 95
600 ml
Replaceable
Special steel
Special steel Ø 5 mm
10,5 m/s²
86 dB(A)
99 dB(A)