Dimplex EF3003-230 Practical User's Manual page 3

QUICK REFERENCE GUIDE FOR THE DIMPLEX ELECTRIC
FIREPLACE
1. Prior to the first use of the fireplace verify the following:
Are the circuit breakers for the unit on?
Are the light bulbs in your fireplace loose? (to check, follow the
instructions for replacing the light bulbs under the maintenance
section of this manual)
2. The heater on your fireplace may emit a slight, harmless odor when
first used. This odor is a normal condition caused by the initial
heating of internal heater parts and will not occur again.
3. If your heater does not emit heat, ensure the switch is on and the
thermostat is turned fully clockwise. If this does not work, switch the
unit off for 5 minutes and try again. Consult page 5 of your Practical
User's Guide for further information.