Advertisement
Quick Links
U
V
-
U
V
-
1. Mount the supplied metal mounting plate onto the duct with duct tape in either a vertical or horizontal position
as shown in Figure 2 of main instruction sheet. (See Figure 1)
2. Bend tabs outward as shown in figure 2.
3. Using a knife or blade, cut out a rectangle opening in the duct using the mounting plate as a template. (See
Figure 3)
4. Remove the cut piece of duct. (See Figure 4)
5. Bend both tabs down and through duct at first bend point. (See Figures 5 & 6)
6. Bend both tabs at the second bend point up or down to pinch the duct material and grip the duct material.
(See Figures 7 & 8)
7. Using a screwdriver or pointed object, locate mounting holes by poking holes through the duct tape. (See
Figure 9)
8. Continue installation using main instruction sheet beginning at step 5 on page 3.
Figure 5
WARNING: Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanent eye damage or
blindness. Never operate the UV-Aire Air Purifying System out of the plenum. Avoid touching the glass portion of the lamp with your
hands.
A
I
R
E
A
I
R
A
I
R
E
A
I
R
Model: UV-16R
Duct Board Mounting Instructions
Figure 1
Figure 6
P
U
R
I
F
Y
I
N
G
P
U
R
I
F
Y
I
N
G
Figure 2
Figure 3
Figure 7
S
Y
S
T
E
M
S
Y
S
T
E
M
Figure 4
Figure 8
P/N 46512300 04/06
Figure 9
Advertisement
