D-Link DHP-W307AV User Manual page 34

Section 3 - Configuration
Channel Width:
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Transmission Rate:
Select the transmission rate. Best (automatic) is recommended for best performance.
Enable Hidden
Check the box if you do not want the SSID of your wireless network to be broadcasted by the DHP-W306AV. If checked, the SSID of
Wireless:
the DHP-W306AV will not be seen by site survey utilities, so your wireless clients will have to know the SSID of your DHP-W306AV
in order to connect to it.
Security Mode:
Refer to page 43 for more information regarding wireless security.
Enable:
Enables the Wi-Fi Protected Setup feature.
Lock Wireless
Locking the wireless security settings prevents the settings from being changed by any new external user using its PIN. Devices
Security Settings:
can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network settings with
Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager user.
Current PIN:
Shows the current value of the access point's PIN.
Generate New
Create a random number that is a valid PIN. This becomes the access point's PIN. You can then copy this PIN to the user interface
PIN:
of the user.
Reset PIN to
Restores the default PIN of the access point.
Default:
Reset to
Resets Wi-Fi Protected Status to Not Configured. The Vista WPS icon will only be displayed when the Wi-Fi Protected status is Not
Unconfigured:
Configured.
D-Link DHP-W307AV User Manual 34