Chapter 2 Installing And Powering Up The Vpn Concentrator; Preparing To Install - Cisco CVPN3015-NR - VPN Concentrator 3015 Getting Started

Installing and Powering Up
the VPN Concentrator
This chapter tells you how to prepare for, unpack, install, and power up the VPN Concentrator, and how
to begin quick configuration.

Preparing to Install

Before you begin, ensure that you have the requisite skill set and that your physical environment and
software preferences are properly set, as described in the following sections.
User or Administrator Skills
We assume you are an experienced system administrator or network administrator with appropriate
education and training, who knows how to install, configure, and manage internetworking systems.
However, virtual private networks and VPN devices may be new to you. You should be familiar with
Windows system configuration and management and with Microsoft Internet Explorer, Netscape
Navigator, or Mozilla browsers.
Physical Site Requirements
The VPN Concentrator requires a normal computing-equipment environment.
Power
Cooling
78-15733-03
The VPN Concentrator requires only normal computing-equipment power. For
maximum protection, we recommend connecting it to a conditioned power source
or uninterruptible power supply (UPS). Be sure that the power source provides a
reliable earth ground.
In the VPN 3005, cooling intake vents are on the front, and fans are on the rear of
the chassis. In the VPN 3015–3080, cooling intake vents are on the left side, and
fans on the right side, of the chassis (looking at the front). Allow at least 3 inches
(75 mm) of unobstructed space on all sides. If you install the device in an equipment
rack, be sure there is adequate airflow.
C H A P T E R
VPN 3000 Series Concentrator Getting Started
2
2-1