Led Designations; System Leds; Device Hardware Interfaces; Rj-45 Ports - NETGEAR GS724AT - ProSafe Gigabit Smart Switch Hardware Installation Manual

GS700AT Hardware Installation Guide
Figure 3-2 illustrates the NETGEAR GS724AT Smart Switch back panel:
Figure 3-2
The back panel contains the following:
• A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for
accommodating the supplied power cord.

LED Designations

This section provides an explanation for the following LED types:
•

"System LEDs"

System LEDs
The following table describes the System LED designations.
Table 3-1. System LEDs
LED
Power LED
FAN LED

Device Hardware Interfaces

This section provides information for the following hardware interfaces:
•

"RJ-45 Ports"

• "SFP GBIC Module"
3-20
Designation
• Off - Power is disconnected.
• Solid Green - Power is supplied to the switch and is operating
normally.
• Off - FAN is operating normally.
• Solid Yellow - FAN has failed.
v1.0, December 2007
Physical Description