Changing Compression Globally; Changing Compression For Groups And Users - Cisco 5505 - ASA Firewall Edition Bundle Administrator's Manual

Configuring, Enabling, and Using Other AnyConnect Features

Changing Compression Globally

To change the global compression settings, use the compression svc command from global
configuration mode:
To remove the command from the configuration, use the no form of the command.
In the following example, compression is disabled for all SSL VPN connections globally:
hostname(config)# no compression svc

Changing Compression for Groups and Users

You can also configure compression for specific groups or users using ASDM with the svc compression
command in group-policy and username webvpn modes. The global setting overrides the group-policy
and username settings.
To change compression for a specific group or user, use the Compression setting in either Group Policy
or Username. You can get to this setting through any of the following paths:
•
•
•
Figure 5-9
Cisco AnyConnect VPN Client Administrator Guide
5-10
compression svc
no compression svc
Configuration > Remote Access VPN > Network (Client) Access > Group Policies > Add or Edit >
Add or Edit Internal Group Policy > Advanced > SSL VPN Client
Configuration > Remote Access VPN > Network (Client) Access > AAA Setup > Local Users > Add
or Edit > Add or Edit User Account > VPN Policy > SSL VPN Client
Device Management > Users/AAA > User Accounts > Add or Edit > Add or Edit User Account >
VPN Policy > SSL VPN Client
shows an example of configuring the compression setting for an internal group policy.
Chapter 5 Configuring AnyConnect Features Using ASDM
OL-12950-012