Configuring the Security Appliance for a DMZ Deployment
In the Interface and Action area:
Step 2
a.
b.
c.
In the Source area:
Step 3
a.
b.
PIX 515E Security Appliance Getting Started Guide
2-20
From the Interface drop-down list, choose Outside.
From the Direction drop-down list, choose Incoming.
From the Action drop-down list, choose Permit.
From the Type drop-down list, choose IP Address.
Enter the IP address of the source host or source network. Use 0.0.0.0 to allow
traffic originating from any host or network.
Chapter 2
Scenario: DMZ Configuration
78-17645-01