Cisco 4404 - Wireless LAN Controller Quick Start Manual page 17

The administrative username and password you created in the Startup Wizard are
Note
case sensitive.
The CLI displays the root level system prompt:
Step 2
#(system prompt)>
The system prompt can be any alphanumeric string up to 31 characters. You can change it by
entering the config prompt command.
The CLI automatically logs you out without saving any changes after 5 minutes of
Note
inactivity. You can set the automatic logout from 0 (never log out) to 160 minutes
using the config serial timeout command.
Cisco Aironet lightweight access points do not connect to the 4400 series controller if the
Note
date and time are not set properly. Set the current date and time on the controller before
allowing the access points to connect to it.
Verifying Interface Settings and Port Operation
Follow these steps to verify that your interface configurations have been set properly and the
controller's ports are operational.
Enter show interface summary. The controller's current interface configurations appear:
Step 1
Interface Name
--------------------------------
ap-manager
management
service-port
virtual
Port Vlan Id IP Address
---- -------- --------------
LAG 10 10.91.104.99
LAG 10 10.91.104.93
N/A N/A 10.10.0.9
N/A N/A 1.1.1.1
Type Ap Mgr
------- -----
Static Yes
Static No
Static No
Static No
17