Table of Contents
Advertisement
Version 2 Setups with Controller Assignments
To take advantage of Version 2's eight zone setup capability, there are 100 new setups in the Version 2 Factory Ob-
jects. You will find unique internal program combinations, arpeggiator examples, special ribbon and controller
functions, and templates for user created setups. With as many as 24 assignable controllers shared among 8 inde-
pendent zones, K2500 MIDI setups can be quite powerful, and they require some experimentation to find all their
features and nuances. In order to make this process easier, many setups are programmed according to the certain
conventions. The sliders generally provide mixing capabilities either as group faders or individual zone faders.
They also provide control over timbre, effects mix, and clock tempo. Other conventions include:
MIDI notes can be triggered from many controllers including pedals, switches, sliders and the ribbons.
Special Purpose Setups
There are three special setups at the end of the bank:
97 Control Setup lets you define controller assignments in program mode. You can customize and select the Con-
trol Setup on the MIDI Xmit page.
98 Clear Setup is a template for creating your own control assignments from a clear palette.
99 Default Setup lets you create your own setups from our common settings. The NewZn parameter uses this
setup as its template for creating new zones.
The complete list of controller assignments for the setups in Version 2 is on the following pages.
Slider F: Arp Vel
Slider G: Wet/Dry mix
Slider H: Tempo
PSw 1: Arp Switch
PSw 2: Latch2
Footswitch 1: Sustain
Footswitch 2: Sostenuto
Footswitch 3: Soft Pedal
Large Ribbon: Aux Bend 1
Small Ribbon Press: Mono Pressure
Small Ribbon Pos: Aux Bend 2
Mod Wheel: Mod Wheel
MPress: MPress
Programs, Setups, and Keymaps
Version 2 Setups with Controller Assignments
2-9
Advertisement
Table of Contents
