Table of Contents
Advertisement
6.
Turn on the amplifier, and plug the ¼-inch phone plug into the AUDIO OUT jack on the rear panel of the K150X, and/or
plug the headphones into the headphone jack on the front panel of the K150X.
7.
Adjust the volume control on the front panel of the K150X to a low, but audible level, and press a keyboard key. You
should now be getting an acoustic piano sound.
When using headphones, the volume control should be set to a comfortable listening level. However, when using an external
amplifier or speaker, best results are obtained when the volume level is set as loud as your amplifier will allow without
distorting.
Selecting Between Programs
The display should currently read:
C1 P1 PIANO
meaning that Program number 1, with name "PIANO", is active and assigned to MIDI Channel 1. Press INCR, and the
display should read:
C1 P2 ABS/PNO
You should now be able to play Program number 2, which has an acoustic bass voice in the lower part of the keyboard and a
piano in the upper part of the keyboard. To return to Program number 1, press DECR.
You can use INCR and DECR to step through all the currently existing programs and play them. You can also jump between
non-sequentially numbered programs by entering the number of the desired program using the numbered buttons, and
pressing ENTER. You are now ready learn more about the K150X and what it does.
1-4
Advertisement
Table of Contents
