Table of Contents
Advertisement
CAUTION
Category
Danger of device
Do not place the XG2000C on its side or stack up multiple XG2000Cs. Doing so may damage the
damage
XG2000C.
Do not install the XG2000C in an unstable place (such as on a slanted surface or a place subjected to
vibrations). Doing so may damage the XG2000C.
Do not place any objects or perform any work on the XG2000C. Doing so may damage the XG2000C.
Install the XG2000C inside a building. Using the XG2000C outside may damage it.
Do not use the XG2000C in areas of extremely high temperature, low temperature, or a area where the
temperature goes up and down suddenly. Installing the XG2000C in such areas may damage it.
Do not expose the XG2000C to seawater. Installing the XG2000C in such areas may damage it.
Do not use the XG2000C in a place subjected to shock or vibrations. Using the XG2000C in such a
place may damage it.
Do not use the XG2000C in a place where chemicals are being sprayed or may otherwise come in con-
tact with it. Using the XG2000C in such a place may damage it.
Do not use the XG2000C near objects which generate strong magnetic fields, such as microwave ovens.
Using the XG2000C in such place may damage it.
Do not use the XG2000C with foreign objects (liquids and/or pieces of metal) inside it. Using the
XG2000C in such a condition may damage it.
When moving the XG2000C, be sure to remove the power plug from the outlet first. No doing so may
damage it.
Danger of
Do not use the XG2000C near a radio or a TV.
electromagnetic
Doing so can interfere with the radio and TV reception.
interference
Danger of
To avoid an electric shock, do not open the cover unless you are a maintenance engineer.
electric shock
When performing maintenance on the XG2000C, be sure to remove the power plug from the outlet first.
Danger when
Only use the XG2000C if the temperature inside the rack is 40°C or less. Ignoring this may damage the
rackmounting
XG2000C.(P.26)
Ensure that the rack is sufficiently ventilated and that excess heat is properly exhausted.(P.26)
Check that the configuration of devices in the rack does not overload the power supply.(P.26)
To ensure the stability of the rack, fix it to the wall or floor as appropriate.(P.26)
Do not install the XG2000C in a rack if it would make it unstable.(P.26)
Check that all units installed in the rack are correctly connected to a grounded power source.(P.26)
When installing and removing the XG2000C from a rack, be sure to hold it by both sides. At least two
people should work together.(P.26)(P.30)
Danger when
When cleaning the XG2000C, only use a soft cloth, and wipe it gently.
cleaning
4
For Safe Use of the XG2000C
This symbol indicates the possibility of minor or moderate personal injury, as
well as damage to the XG2000C and/or to other users and their property, if
the XG2000C is not used properly.
Caution
Advertisement
Table of Contents
