MSI 990FXA User Manual page 49

▶ Hardware Montor
Press <Enter> to enter the sub-menu.
▶ CPU Smart Fan Target
The Smart Fan functon controls the CPU fan speed automatcally dependng on the
current temperature to keep t wth n a specfic range. You can enable a fan target
value here. If the current CPU fan temperature reaches to the target value, the smart
fan functon wll be actvated.
▶ SYS Fan 1~4 Control
These tems allow users to select how percentage of speed for the SYSFAN1~4.
▶ CPU/ System Temperature, CPU FAN/ SYS FAN 1~4 Speed
These tems show the current status of all of the montored hardware components
such as CPU/ system temperatures and all fans' speeds.
▶ Power Management Setup
Press <Enter> to enter the sub-menu.
▶ EuP 2013
Ths tem s desgned for Energy Usng Products Lot 6 2013 (EuP) aka Energy
Related Products (ErP). To reduce Power Consumpton when system off or standby
mode.
Note: When "Enabled" EuP 2013 settng, system don't support RTC wake up event
functon.
▶ Restore on AC Power Loss
Ths tem specfies whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Power Off] Always leaves the computer n the power off state.
[Power On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
MS-7640 MS-7640
3-9