Table of Contents
Advertisement
Platforms
SLES 10 SP2 (32-bit)
NOTE: For Sentinel 6.1 Rapid Deployment server, use SLES 10 SP2 (64-bit) OS with ext3 file
system. For more information on file systems, see
www.novell.com/documentation/sles11/stor_admin/data/filesystems.html)
Administration Guide.
3.2 Supported Web Browsers
Mozilla* Firefox* 2.0.0.10
Mozilla Firefox 3.x
Internet Explorer* 8.x
3.3 Hardware Requirements
The Sentinel server components run on x86-64 (64-bit) hardware. Sentinel is certified on AMD
Opteron and Intel Xeon hardware. Itanium servers are not supported.
This section includes some general hardware recommendations for Sentinel system design. In
general, design recommendations are based on event rate ranges. However, these recommendations
are based on the following assumptions:
The event rate is at the high end of the EPS range.
The average event size is 600 bytes.
24
Sentinel 6.1 Rapid Deployment Installation Guide
Sentinel Server Components
Limited Support
NOTE: A demo-only package
of Novell® Sentinel™ Rapid
Deployment is designed for
limited-scale demonstration
and testing environments by
using 32-bit hardware and
operating systems.
Customers or partners with a
contract for Sentinel Rapid
Deployment support can
receive limited support on this
platform from Novell Technical
Support to the extent that the
issues can be reproduced on
the 64-bit production platform.
Due to the inherent limitations
of 32-bit hardware, Novell
Technical Support does not
troubleshoot performance or
scalability issues with the 32-bit
demo version. The 32-bit demo
versions are unsupported in a
production environment.
Sentinel Client
Collector
Applications
Manager
Limited
Certified
Support
Overview of File Systems in Linux (http://
in the Storage
Collector
Builder
Limited
Support
Advertisement
Table of Contents
