Removing The Framework Manager; Tru64; Windows; Aix Manager Uninstall - Novell PRIVILEGED USER MANAGER 2.2.1 - GETTING STARTED GUIDE 03-31-2010 Getting Started Manual

3.5.5 Tru64

To stop the Framework process:
/sbin/init.d/npum stop
To start the Framework process:
/sbin/init.d/npum start
To check the status:
/sbin/init.d/npum status

3.5.6 Windows

To stop the Framework service:
1 Select the Start button.
2 Select Control Panel.
3 Select Administrative Tools.
4 Select Services.
5 Select the Framework Manager service.
6 Select Stop.
To start the Framework service, follow the above instructions and select Start.

3.6 Removing the Framework Manager

Section 3.6.1, "AIX Manager Uninstall," on page 23
Section 3.6.2, "HP-UX Manager Uninstall," on page 24
Section 3.6.3, "Linux Manager Uninstall," on page 24
Section 3.6.4, "Solaris Manager Uninstall," on page 24
Section 3.6.5, "Tru64 Manager Uninstall," on page 24
Section 3.6.6, "Windows Manager Uninstall," on page 24

3.6.1 AIX Manager Uninstall

1 Use one of the following methods:
The AIX smitty program.
The following command:
installp -u novellnpum
IMPORTANT: This action cannot be undone.
2 Delete the
/opt/novell/npum
Deleting the directory structure removes the existing Framework Host settings from the server,
allowing for clean re-installation.
directory structure.
Installing the Framework Manager 23