Verifying That The Installation Was Successful - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

After a successful configuration, YaST shows the Installation Completed dialog. In this dialog, do
the following:
1 (Optional) Select whether to clone your newly installed system for AutoYaST. To clone your
system, select Clone This System for AutoYaST. The profile of the current system is stored in
root/autoinst.xml
AutoYaST is a system for automatically installing one or more SUSE Linux Enterprise systems
without user intervention. AutoYaST installations are performed by using a control file with
installation and configuration data. For detailed information, see
to Install and Configure Multiple OES Servers," on page
2 Finish the installation by clicking Finish in the Installation Completed page.
3 After the server reboots, continue with
Successful," on page
3.5 Verifying That the Installation Was
Successful
One way to verify that your OES server installation was successful and that the components are
loading properly is to watch the server reboot. As each component is loaded, the boot logger
provides a status next to it indicating if the component is loading properly.
You can also quickly verify a successful installation by accessing the server from your Web
browser.
1 In the Address field of your Web browser, enter the following URLs:
http://IP_or_DNS
Replace IP_or_DNS with the IP address or DNS name of your OES server.
You should see a Web page similar to the following:
72 OES 2 SP2: Installation Guide
. Cloning is selected by default.
Section 3.5, "Verifying That the Installation Was
72.
Chapter 8, "Using AutoYaST
167.
/