Table of Contents
Advertisement
Installation Procedure
This chapter offers an overview of the steps required for the complete installation of
SUSE® Linux Enterprise Server in the required mode. Find detailed information about
the preparations for installing SUSE Linux Enterprise Server on x86, AMD64, Intel
EM64T, and Itanium in the Architecture-Specific Information manual, which is available
as a printable PDF in the /docu directory on the first CD or DVD. Reference contains
a full description of how to install and configure the system with YaST.
2.1 Booting from a Local
Interchangeable Drive
CD-ROM and floppy drives and USB memory sticks can be used for installation pur-
poses. Adjust your computer to your needs:
1.
Make sure that the drive is entered as a bootable drive in the BIOS.
2.
Insert the boot medium in the drive and start the boot procedure.
3.
The boot menu of the CD, DVD, floppy, or USB disk allows transferring different
parameters to the installation system. See also Section 4.4.3, "Using Custom
Boot Options" (Chapter 4, Remote Installation, ↑Installation and Administration).
If the installation should be performed over the network, specify the installation
source here.
4.
If unexpected problems arise during installation, use safe settings to boot.
Installation Procedure
2
7
Advertisement
Table of Contents
