Table of Contents
Advertisement
To check which fonts are currently available, type the URL
field of a Konqueror session. This displays two windows: Personal and System.
User-installed fonts are installed to the folder Personal. Only root can install to the
System folder.
To install fonts as a user, follow these steps:
1.
2.
3.
4.
To update system fonts, first select Administrator mode and enter your root password.
Then proceed as described for user font installation.
1.11.7 Controlling Sound with KMix
YaST identifies and configures the sound cards of your computer automatically. Other-
wise, start the YaST Hardware module and configure the sound card manually. When
your sound card has been configured, you can control the volume and balance of the
sound with a mixer.
TIP: Starting the Mixer
If the mixer icon (a loudspeaker symbol) is not visible in the panel of your
desktop, press
You usually find it under Volume Control.
By default, clicking the KMix icon in the system tray shows the master controller where
you can increase or decrease the overall volume. To switch off the sound, click the
green LED, which darkens when it is muted. Toggle this option by clicking the LED
again. To fine-tune your sound settings for several channels, right-click the KMix icon
and select Show Mixer Window. In the main window, you can configure Output, Input,
52
KDE User Guide
Start the Control Center and access the appropriate module with System Admin-
istration → Font Installer.
Choose Add Fonts from the toolbar or from the menu available when right-
clicking the list.
In the dialog that opens, select one or more fonts for installation.
The marked fonts are then installed to your personal font folder. Selecting a font
shows a preview.
+
and enter kmix or start the mixer from the main menu.
Alt
F2
into the address
fonts:/
Advertisement
Table of Contents
