Novell LINUX ENTERPRISE 10 SP2 - SUBSCRIPTION MANAGEMENT TOOL GUIDE Manual page 44

HTTPSProxy
If you do not want to use global proxy settings, specify the proxy to be used for
HTTPS connection here. Use the form: http://proxy.example.com:3128.
If the proxy settings are not configured in /etc/smt.conf, the global proxy
settings configured in /etc/syconfig/proxy are used. The global proxy
settings can be configured using the YaST Proxy module.
The HTTPSProxy also applies to the smt-mirror-sle9 script.
ProxyUser
If your proxy requires authentication, specify a username and password here, using
the username:password format.
If the proxy settings are not configured in /etc/smt.conf, the global proxy
settings configured in /etc/syconfig/proxy are used. The global proxy
settings can be configured using the YaST Proxy module.
Neither the ProxyUser value nor the global proxy authentication settings apply
to the smt-mirror-sle9 script. For user authentication in smt-mirror-sle9
write the following in the /root/.wgetrc file: proxy_user=username
proxy_password=password.
[REPORT] Section of /etc/smt.conf
The following options are available in the [REPORT] section:
reportEmail
A comma separated list of e-mail addresses to send SMT status reports to. This list
can be set using YaST SMT Configuration Module.
reportEmailFrom
From field of report e-mails. If not set, the default
root@hostname.domainname will be used.
mailServer
Relay mail server. If empty, e-mails are sent directly.
mailServerPort
Port of the relay mail server set in mailServer.
40 Subscription Management Tool Guide