Novell LINUX ENTERPRISE 10 SP2 - SUBSCRIPTION MANAGEMENT TOOL GUIDE Manual page 27

NOTE: Lowest Registration Frequency
Do not set the frequency lower than 10 minutes, because the maximal
value of the rndRegister is 450 (7.5 minutes). If the frequency is
lower, it may occur that the started process is still sleeping when the next
process starts. In this case, the second request will exit.
5 Click either OK or Add and Finish.
You will find more information about the YaST SMT Configuration module in
ter 2, Configuring SMT Using YaST
covered in Section 2.5, "Setting the SMT Job Schedule with YaST"
YaST uses cron to schedule Novell Customer Center registrations and other SMT
jobs. If you do not want to use YaST, you can use cron directly.
To disable automatic registration, change the forwardRegistration value in the
[LOCAL] section of the /etc/smt.conf configuration file to false.
(page 5). Scheduling of SMT jobs in general is
Managing Client Machines With SMT
Chap-
(page 10)
23