Schema Flags Added In Edirectory 8.7 - Novell EDIRECTORY 8.8 SP3 - ADMINISTRATION Administration Manual

are also provided (/opt/novell/eDirectory/lib/nds-modules/schema/rfc2307-
usergroup.ldif and /opt/novell/eDirectory/lib/nds-modules/schema/
rfc2307-nis.ldif respectively).
You can extend the RFC 2307 schema using the ndssch utility or the ldapmodify tool.
"Using the ndssch Utility" on page 128
"Using the ldapmodify Utility" on page 128
Using the ndssch Utility
Enter one of the following commands:
ndssch -t /opt/novell/eDirectory/lib/nds-schema/rfc2307-
usergroup.sch
or
ndssch -t /opt/novell/eDirectory/lib/nds-schema/rfc2307-nis.sch
Parameter
-t
Using the ldapmodify Utility
Enter one of the following commands:
ldapmodify -h -D -w -f /opt/novell/eDirectory/lib/nds-schema/
rfc2307-usergroup.ldif
or
ldapmodify -h -D -w -f /opt/novell/eDirectory/lib/nds-schema/
rfc2307-nis.ldif
Parameter
-h ldaphost
-D binddn
-w passwd
-f file

4.4 Schema Flags Added in eDirectory 8.7

The READ_FILTERED and BOTH_MANAGED schema flags were added to eDirectory 8.7.
READ_FILTERED is used to indicate that an attribute is an LDAP OPERATIONAL attribute.
LDAP uses this flag when it requests to read the schema to indicate that an attribute is "operational."
Some internally defined schema attributes now have this flag set. The LDAP "operational"
128 Novell eDirectory 8.8 Administration Guide
Description
Name of the tree on that the schema is to be extended on. This is an optional
parameter. If this parameter is not specified, the tree name is taken from the /etc/
opt/novell/eDirectory/conf/nds.conf file.
Description
Specifies an alternate host on which the LDAP server is running.
Uses binddn to bind to the X.500 directory. It should be a string-represented DN
as defined in RFC 1779.
Uses passwd as the password for simple authentication.
Reads the entry modification information from file instead of from standard input.