Pairing - BlueTrek COMPACT CLASSIC Manual

Pairing the BLUETREK® COMPACT CLASSIC
Before using the BLUETREK® COMPACT CLASSIC, you must pair it with your Bluetooth®
mobile phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can
communicate.
To initiate pairing:
1. Place the BLUETREK® COMPACT CLASSIC and your mobile phone within 0.3 meter (1
foot) from each other.
2. Switch on your phone and select its Bluetooth® discover mode (refer to the Bluetooth®
mobile phone user manual).
3. When the BLUETREK® COMPACT CLASSIC is switched on, press and hold both the TALK
button and the VOL+ button for about 5 seconds until the indicator light flashes red and
blue alternately. And a sound can be heard in the speaker.
4. Once the mobile phone detects the car kit, a "BLUETREK COMPACT CLASSIC" message
will be displayed. Follow the phone instructions to accept the pairing. The PIN code (or
passkey) is 0000, then press "yes" or "ok".
If pairing was successful, the indicator light will switch to blue.
If you haven't started the discovery mode within 5 minutes, it will stop. In this case, you
must start the pairing again as step 3 above.
5 I BLUETREK COMPACT CLASSIC