Page 2
Before using your BLUETREK® COMPACT CLASSIC for the first time, you must charge it continuously for approximately 3 hours, until the indicator change to green. Please refer to the “Charging the BLUETREK® COMPACT CLASSIC” section of this manual. Introduction The BLUETREK® COMPACT CLASSIC is a wireless car kit based on Bluetooth® technology.
Page 3
Using the BLUETREK® COMPACT CLASSIC in different environment Mounting on the sun visor as a car kit When using your BLUETREK® COMPACT CLASSIC in your car, simply mount the unit onto the visor with the clip as shown in Diagram 1. Mic 1...
Page 4
Charging the BLUETREK® COMPACT CLASSIC Connect the charging cable to the car charger and insert the car charger into the cigarette lighter socket as shown in Diagram 2. Diagram 2 3 I BLUETREK COMPACT CLASSIC...
Page 5
The green indicator light will turn on when the unit is fully charged. Subsequent charges should take approximately 3 hours. When the indicator light on your BLUETREK® COMPACT CLASSIC flashes in red at regular intervals (or the voice alert is activated), the unit needs to be recharged.
2. Switch on your phone and select its Bluetooth® discover mode (refer to the Bluetooth® mobile phone user manual). 3. When the BLUETREK® COMPACT CLASSIC is switched on, press and hold both the TALK button and the VOL+ button for about 5 seconds until the indicator light flashes red and blue alternately.
Page 7
Switching the BLUETREK® COMPACT CLASSIC ON and OFF Switching the BLUETREK® COMPACT CLASSIC ON Switch on the BLUETREK® COMPACT CLASSIC by lifting up the microphone arm as shown in Diagram 4. You will hear a beep (2 tones) in the speaker (and continuous connecting beeps until it is connected to the handset).
Answering a call When your BLUETREK® COMPACT CLASSIC is OFF Switch on your BLUETREK® COMPACT CLASSIC. After about 3 seconds, It will automatically transfer the call from the phone to the car kit For some phones, you may need to press “Connect”...
Press once on the TALK button to end an active call. Adjusting the volume To increase the volume during an active call, press the “VOL+” button on the BLUETREK® COMPACT CLASSIC. To decrease the volume during an active call, press the “VOL-“ button on the BLUETREK®...
Page 10
Transferring a call from the BLUETREK® COMPACT CLASSIC to the mobile phone With a phone in Headset Profile During an active call, to transfer it to the phone, simply turn off your BLUETREK® COMPACT CLASSIC. With a phone in Hands-Free Profile During an active call, to transfer it to the phone, double click on the TALK button.
To switch between an active call and a held call, press the TALK button on the BLUETREK® COMPACT CLASSIC approximately 2 seconds. To end the active call and take the held call, press the TALK button once on the BLUETREK® COMPACT CLASSIC.