Turning The Camera On And Getting Started; Turning The Camera Off - DigiCam ES3310 User Manual

Turning the Camera On and Getting Started

To turn on once the batteries are loaded:
1. Open the lens cover first, and then press down and hold the power
2. When the camera is turned on, the GREEN LED underneath the

Turning the Camera Off

To turn off the camera:
1. Press down and hold the power button for ONE second. The GREEN
2. Close the lens cover.
button for ONE second.
direction button will light up.
To take a picture, press the shutter button. For full details turn to
Taking Photos in Section 3.
To view stored photos press the mode button once to move to
Playback Mode. Press a second time to return to Camera Mode. For
full details turn to Section 4, Playback Mode.
To take a movie clip, press the PC mode/movie button to temporarily
switch to Movie Mode then the shutter button to start filming. For full
details of taking movie clips turn to Taking Movies in Section 3.
LED will light out.
Note
If you only want to use the camera in Playback
Mode (i.e. you don't intend to take any photos)
you do not have to open the lens cover before
turning on the camera.
Note
The camera will turn itself off automatically if it is
left unused for THREE minutes.
6