Using The Flash; Setting The Lcd Brightness - DigiCam ES3310 User Manual

Using the Flash

Your camera has two flash settings:
Auto-flash: the flash fires automatically
according to lighting conditions. Use this
mode for general photography
Flash Off: the flash won't fire under any
circumstances. Use this mode when
taking images in a place where flash
photography is prohibited, or when the
subject is distant (beyond the range of
the flash).

Setting the LCD Brightness

Three brightness settings are available:
Low LCD Brightness: Normally
sufficient in dim lighting conditions
Normal LCD Brightness: Use in
intermediate lighting conditions.
This is the default setting.
High LCD Brightness: Use in
bright conditions.
Note
The flash cannot be used when battery power is
low ( ).
14