Figure 3. Main Run Screen Display Fields - Fluke RPM4-AD Operation And Maintenance Manual

RPM4-AD™ OPERATION AND MAINTENANCE MANUAL
DISPLAY FIELD
1. PRESSURE1
2. UNIT
3. M
4. h
5. z
6. RR
8. DISPLAY
FUNCTION
9. D
© 2005-2007 DH Instruments, a Fluke Company
P R E S S U R E 1 U N I T M h z R R
D D I S P L A Y F U N C I O N
NAME PURPOSE
Measured Displays value
pressure, measured by the
altitude or active Q-RPT(s)
airspeed
Unit of Identifies unit of
measure measure in which
pressure or pressure
derived values are
displayed
Measurement Identifies measurement
mode mode of displayed
pressure or air data
value
Head Indicates whether a
indicator fluid head correction
is applied to
PRESSURE1
AutoZero Indicates whether the
indicator AutoZero function is
ON or OFF for the
active Q-RPT and
measurement mode
Active Indicates the active
Q-RPT Q-RPT in the RPM4.
indicator The active Q-RPT
measurement is
displayed on the RPM4
top line.
Information Pressure indication
specific to the depending on current
DISPLAY RPM4-AD DISPLAY
mode function. Leading
character identifies the
value
Pressure Pressure information
information indicator depending on
indicator current RPM4-AD
DISPLAY function.

Figure 3. MAIN RUN screen display fields

Page 14
CONTENTS
Numerical pressure value and sign.
Intermittently flashes <SDS CLOSED>
when the Q-RPT is shut off from the
TEST port by SDS.
Unit of measure abbreviation
<a> absolute
<g> gauge or negative gauge
<d> differential
<h> the fluid head is not zero
<blank> fluid head is zero
<z> AutoZ is ON
<blank> AutoZ is OFF
<Hi> Hi Q-RPT
<Lo> Lo Q-RPT
<HL> Hi and Lo Q-RPTs together in
parallel measurement mode
(A160K/A160K only)
<Hd> Hi and Lo Q-RPTs together in
differential measurement mode
Numerical pressure value
and sign.
<σ> Display mode is AVERAGE
and value is standard deviation
<R> Display mode is RATE and
value is pressure or air data
unit rate of change per second
</s> or per minute </m>
<H> Display mode is HI/LO and
values high (left), low (right)
<D> Display mode is DEVIATION
and value is difference from
current target
None Display mode is RPT and value is
measurement of inactive RPT
(<Lo> or <Hi> to right)
<F> Display mode is FREEZE and
value is last captured reading
Blank, no character Current display
mode is CLEAN
SECTION
3.2.8
3.3.2
3.3.3
3.3.7
3.5.1
3.2.1
3.3.6
3.3.6