Table of Contents
Advertisement
6. When prompted to confirm the BIOS update, press Y to start the update.
7. The utility starts to program the new BIOS information into the flash ROM. The
boot block will be updated automatically only when necessary. This will mini-
mize the chance that a failed update will prevent your system from booting up.
When the programming is finished, Flashed Successfully will be displayed.
8. Follow the onscreen instructions to continue:
WARNING!
If you encounter problems while updating the new BIOS, DO NOT
turn off your system since this might prevent your system from booting up. Just
repeat the process, and if the problem still persists, update the original BIOS file
you saved to disk above. If the Flash Memory Writer utility was not able to suc-
cessfully update a complete BIOS file, your system may not be able to boot up. If
this happens, your system will need servicing.
4. BIOS SETUP
ASUS P4T-M User's Manual
41
Advertisement
Table of Contents
