Dell 5324 - PowerConnect Switch User Manual Addendum page 7

Optional TLVs — Contains a list of optional TLVs advertised by the port. For the complete list, see the
Available TLVs field.
Available TLVs — Contains a list of available TLVs that can be advertised by the port. The possible field values
are:
Port Description— Advertises the port description.
System Name — Advertises the system name.
System Description — Advertises the system description.
System Capabilities — Advertises the system capabilities.
Management IP Address — Indicates the management IP address that is advertised from the interface.
The LLDP Port Table page displays the LLDP Port Configuration. To open the LLDP Port Table, click Security
→ →
LLDP Port Settings
Figure 1-3. LLDP Port Table
Table 1-2. LLDP Port settings CLI Commands
CLI Command
clear lldp rx interface
lldp optional-tlv tlv1 [tlv2
... tlv5]
lldp enable [rx | tx | both] To enable Link Layer Discovery
The following is an example of the CLI commands:
→
Show All in the tree view.
Description
Restarts the LLDP RX state machine
and clearing the neighbors table
Specifies which optional TLVs from the
basic set should be transmitted
Protocol (LLDP) on an interface.
7